Sewage Water Flange Electromagnetic Flow Meter With PTFE Liner
Due to its unique advantages, it is widely used in the fields of
petroleum, chemical industry, steel, light industry, sewage
processing, environmental protection, water conservancy project and
pharmacy to measure the volume flow of the conducted liquid
mediums, such as acid, alkali, salt solution and so on.
1. High Definition LCD display with backlight.
2. Full-digital processing, high noise resistance and reliable
3. 16 bits embedded microprocessor
4. High precision 0.5%F.S measurement is not affected by fluid
density, viscosity, temperature, pressure the influence for the
5. After power outage, daily total, monthly total data recording
function,To calculate the leakage flow automatically ,Circular
recording 2050 dates,Free on-site maintenance
6. Double layer protection technique:360 ° spray paint, Polishing
technology wear-resisting, anti-rust durable
7. Header board:Using a synthetic version, the integration is high,
antioxidant, long life
8. 3 electrode: Ground electrode structure, eliminate the influence
of electrical noise, provide measurement precision effectively
|PTFE Lined Pipe||10, 15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300,
350, 400, 450, 500, 600|
|Rubber Lined Pipe||40, 50, 65, 80, 100, 125, 150, 200, 300, 350, 400, 500, 600, 800,
1000, 1200, note: special specifications can be customized|
|Flow direction||positive and negative, net flows Turndown|
|Measuring range ratio||150:1|
|Accuracy||piped: 0.5 class, 1.0 class|
|Measured medium temperature||Common rubber lining: -20~+60 ° c|
|High temperature rubber lining: -20~+90 ° c|
|PTFE lining: -30~+100 ° c|
|High temperature vinyl lining: -30~+180 ° c|
|Rated working pressure|
pipeline: DN10~DN65: ≤ 2.5MPa;DN80~DN150: ≤ 1.6MPa;
DN200~DN1200: ≤ 1.0MPa
|Flow measuring range||flow measuring range corresponding to flow rate range is 0.3~15m/s|
|Measured fluid conductivity||5μs/cm (Most with water as the composition of the medium, its
conductivity in the range 200~800 Mu s/cm, optional solenoid flow)|
|Output||Current:4~20mADC (isolation), pulse frequency 0~1kHz, OCT
photoelectric isolation, external power ≤ 35VDC, breakover,
collector Max 25mA|
|Load resistance||< 600 Ω|
|Electrode material||316L, titanium (Ti), tantalum (Ta), Hastelloy, (h), Platinum (Pt)
or other special electrode materials|
|Protection grade||standard: IP65; IP68|
|Working power supply||85~265VAC 45~63HZ|
|Straight pipe length||pipe: ≥ 5DN in the upper reaches, downstream of greater than or
equal to 2DN|
|Connections||flow meter connected to the piping is used between flanges, flange
connection dimensions comply with GB9119-88 requirements.|
|environment temperature||-25 ° c ~=60 ° c|
|Total power consumption||<20W|
Q:What are the products VACORDA offer ?
A: Pressure sensor, level sensor, flow meter and digital
Q:Could I get samples?
A:Yes,we have materials in stock to help you to get the samples as
soon as we can.
Q:How about the quality of the magnets?
A:We have the certification of ISO, TUV-CE and ROSH,we could send
the certification test of our company to you.
Q:Could you provide me the shortest lead time?
A:We have materials in our stock,if you really need,you can tell us
and we will try our best to satisfy you.
Q:Could I visit your factory?
A:Of course,if you need we will help you to visit our factory.
Q: How can I get the quotation or send my inquiry to?
A: Send your inquiry to us by the inquiry from on the right-side or
the bottom of this page.